1. The boundaries of the site;

2. All existing and proposed public and private streets and ways within and adjacent to the site. Private streets and ways shall be labeled as private streets or ways. Pedestrian ways shall be included on the development plan;

3. The location and design of parking facilities, including points of ingress and egress;

4. The proposed location, vertical height and envelope of all proposed buildings;

5. The location, vertical height and envelope of all existing buildings;

6. All proposed and existing lot lines;

7. The number of proposed residential units and location of proposed commercial or industrial spaces in each building;

8. The development plan or a separate document shall include a typical elevation of all buildings proposed for the planned development, except for single-family dwellings and duplexes;

9. All open space and recreational areas;

10. Information on existing and proposed topography shall be shown with contour intervals of no greater than five feet;

11. A general plan of the proposed landscaping and the location and composition of the landscaping;

12. All existing and proposed bodies of water, drainage ways and the proposed drainage improvements;

13. The location of all existing and proposed utilities;

14. Any areas, facilities or ways to be dedicated to the public shall be clearly marked on the development plan;

15. The proposed treatment of the exterior boundary of the site;

16. A vicinity map;

17. Quantitative data for the following: total site area, public open space, private open space, usable recreation space, total number of dwelling units, number of dwelling units by type, and the acreage used for roads and vehicle accessways.